New Feature and Enhancement:
- None.
Bug Fixes:
- Packets with VLAN tag are forwarded out from ports that should have the VLAN tag removed.
- Packets without VLAN tag are forwarded out from ports that should have the VLAN tag.
Known Issues:
None
Limitations:
- Cable Test is designed to work specifically with Category 5 (CAT-5) cable. Incorrect test result may be shown if different type of cable is used.
- The accuracy of the Cable Test is within 5 meters. So, testing with cable shorter than 5 meters may yield incorrect result.
- When “Block Unknown Multicast” is enabled, packets with the following destination addresses will also be blocked: 01:00:5E:00:00:xx and 33:33:xx:xx:xx:xx.
Installation Instructions
- Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop.
Download Link: http://www.downloads.netgear.com/files/GDC/GS108Ev2/GS108Ev2-Firmware Version-_1.00.06.zip
- Start ProSAFE Plus Configuration Utility, (included on the CD coming with your Smart Switch). If it is not installed, do so now, before continuing.
- The ProSAFE Plus Utility will scan and detect ProSAFE Plus switches on your network. Select the switch to upgrade by clicking on the radio button next to the switch. Enter the adminstrator password of the switch when prompted.
- Select Maintenance under the System tab. Click on Firmware Upgrade and Browse to the location when the firmware image is saved.
- Click Apply to start firmware upgrade.
Last Updated:11/28/2016
|
Article ID: 20014